Guide To Enter Download Mode On LG Android Smartphone.

Enter Download Mode On LG Android. Today's guidebelajar will show to you about guide how to Enter Download Mode On LG Android Smartphone. All android expert user must know how to enter download mode on their Android smartphone, this is an important mode for the Android devices. Many reasons that should you know why you have to enter download mode on Android devices. The main reason is when we going to flash or install a new firmware to our android system, it is mean our android device in a boot loop state, or you just want to upgrade your android firmware or ROM.

When You enter download mode on LG android smartphone you can do various operations to your phone using your computer, for example, to apply an update manually. Before you proceed to enter download mode on your Android device, please make sure that your device is an LG Android Smartphone, it is work for most of LG Android smartphone. The guide below has been tested only on the mentioned device, which means that this guide will not work in case you have a similar or different Android-based devices. So read this article carefully.

Guide To Enter Download Mode On LG.

Please follow this guide to enter download mode on Android smartphone devices.

First, that should you do is Power Off your LG Smartphone.
Or you can Remove battery out from your phone if your device is removable battery
Use the original USB cable for your LG smartphone. Usually, this cable came with this device in the single box.
Now, do the following task below, while plugs in USB Cable from PC to your Phone.

Press and hold volume UP button,

Enter Download Mode On LG Android

Then your screen will show (download mode), if you see this you can release Volume UP button.
download mode LG
Press and hold volume UP Button on your LG phone again, until you see FIRMWARE UPDATE message.
firmware update LG phone
If your phone has been detected on your PC (to make sure, click the monitor icon beside Reading Phone Information button, this action will open device manager windows. If your phone was detected you can see this at the top).
Click START, and you will see dialogue box, just click OK
Wait for the flash process, it will run in approximately 5 minutes and your LG will restart itself
Then your LG phone will boot up, if you can see Welcome Screen, it's mean Flashing process is successful.
Unplug USB cable, and finish
Now your LG has installed the new firmware.